HP Tx1220us HP Pavilion tx1000 Entertainment PC - Maintenance and Service Guid - Page 72
Pull the system board, until the power connector
View all HP Tx1220us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
3. Remove the ExpressCard slot bezel (4) from the ExpressCard slot. NOTE: The ExpressCard slot bezel is included in the Plastics Kit, spare part number 441138-001. 4. Use the optical drive connector (1) to lift the left side of the system board (2) until the power connector (3) is clear of the base enclosure. 5. Pull the system board (4) away from the top cover at an angle and remove it. Reverse this procedure to install the system board. ENWW Component replacement procedures 67
3
.
Remove the ExpressCard slot bezel
(4)
from the ExpressCard slot.
NOTE:
The ExpressCard slot bezel is included in the Plastics Kit, spare part number
441138-001.
4
.
Use the optical drive connector
(1)
to lift the left side of the system board
(2)
until the power connector
(3)
is clear of the base enclosure.
5
.
Pull the system board
(4)
away from the top cover at an angle and remove it.
Reverse this procedure to install the system board.
ENWW
Component replacement procedures
67