HP Visualize J5000 hp Visualize J5000, J7000 workstations service handbook (a4 - Page 79

Troubleshooting Identifying LCD-Indicated Conditions Table 3-1. Chassis Codes for J5xxx and J7xxx Workstations Ostat WRN INI WRN WRN WRN WRN WRN WRN FLT WRN WRN WRN FLT FLT FLT OFF Code FRU CB0A SYS BD CB0B SYS BD CB0C SYS BD CB10 SYS BD CB11 SYS BD CB12 SYS BD CB13 SYS BD CB14 SYS BD CB1F SYS BD CB71 SYS BD CB72 SYS BD CB73 SYS BD CB9r CB99 CB9A IO BD SYS BD SYS BD CBA1 SYS BD Message Description prev TOC logged branch to OS TOC br OS TOC failed LPMC initiated icache LPMC err dcache LPMC err dcache tag error dcache data err OS LPMC failed HPMC occurred LPMC occurred TOC occurred Error on roper seed IVA handler HPMC overwrite AIOC int dat err Firmware detected unread PIM data from a previous TOC and will not overwrite it. (PIM for this TOC is lost.) Branching to the operating system TOC handler. Branch to the operating system TOC handler failed. Firmware will soft boot the system. A Low-Priority Machine Check entered the firmware LPMC handler. The handler should log the error and return to normal operation. An instruction cache parity error caused the LPMC. A data cache parity/ECC error caused the LPMC. The parity error is in the tag portion of the data cache. The parity error is in the data portion of the data cache. Firmware couldn't branch to the operating system LPMC handler. It will halt the CPU, requiring a power cycle to recover. A High-Priority Machine Check caused entry to PDCE_CHECK (the firmware trap handler). A Low-Priority Machine Check caused entry to PDCE_CHECK (the firmware trap handler). A Transfer of Control caused entry to PDCE_CHECK (the firmware trap handler). An error was detected on rope r. PDC_SEED_ERROR triggered an HPMC. Firmware is overwriting PIM data from a previous HPMC. I/O controller internal error. Chapter 3 73