HP ap5000 Hardware Reference Guide HP ap5000 All-In-One Point of Sale System - Page 14
Removing the Drive Cover, Replacing the Drive Cover
View all HP ap5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Removing the Drive Cover To remove the drive cover, loosen the screw that holds the cover in place (1), rotate the cover back (2), and pull the cover off the display head (3). NOTE: The drive cover screw is captive, therefore it does not disengage from the drive cover when loosened. Figure 2-5 Removing the Drive Cover Replacing the Drive Cover To replace the drive cover, slide the tabs on the cover into the slots on the side of the display (1), rotate the cover onto the display (2), then tighten the screw (3). Figure 2-6 Replacing the Drive Cover 8 Chapter 2 Hardware Upgrades ENWW
Removing the Drive Cover
To remove the drive cover, loosen the screw that holds the cover in place (1), rotate the cover back (2),
and pull the cover off the display head (3).
NOTE:
The drive cover screw is captive, therefore it does not disengage from the drive cover when
loosened.
Figure 2-5
Removing the Drive Cover
Replacing the Drive Cover
To replace the drive cover, slide the tabs on the cover into the slots on the side of the display (1), rotate
the cover onto the display (2), then tighten the screw (3).
Figure 2-6
Replacing the Drive Cover
8
Chapter 2
Hardware Upgrades
ENWW