HP ap5000 Hardware Reference Guide HP ap5000 All-In-One Point of Sale System - Page 21
Replacing the Bottom I/O Cover, on Configuring the MSR and VFD Customer Display - power button
View all HP ap5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
9. If you are replacing the VFD customer display, slide the new customer display into the slot on the hinge (1) and insert the two screws that secure it in place (2). Figure 2-16 Replacing the VFD Customer Display 10. Attach the hinge bracket cover by placing the upper sides of the cover over the sides of the bracket (1) then pressing the bottom of the cover onto the bracket so that it snaps in place (2). Figure 2-17 Replacing the VFD Hinge Bracket Cover 11. Replace the bottom I/O cover (see Replacing the Bottom I/O Cover on page 6). 12. Reconnect the power cord and press the power button. 13. Configure the new customer display (refer to Configuring the MSR and VFD Customer Display on page 27). ENWW Removing and Replacing the VFD Customer Display 15