HP ap5000 Hardware Reference Guide HP ap5000 All-In-One Point of Sale System - Page 31
Replacing the Display Head, Installing a DIMM
View all HP ap5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
12. Open both latches of the memory module socket (1), and insert the memory module into the socket (2). NOTE: A memory module can be installed in only one way. Match the notch on the module with the tab on the memory socket. 13. Push the module down into the socket, ensuring that the module is fully inserted and properly seated. Make sure the latches are in the closed position (3). Figure 2-29 Installing a DIMM 14. Repeat steps 12 and 13 to install any additional modules. 15. After installing the memory module(s), place the top of the display head housing onto the display head (1), then set the bottom of the display head housing onto the display head (2). Figure 2-30 Replacing the Display Head ENWW Installing Additional Memory 25
12.
Open both latches of the memory module socket (1), and insert the memory module into the socket
(2).
NOTE:
A memory module can be installed in only one way. Match the notch on the module with
the tab on the memory socket.
13.
Push the module down into the socket, ensuring that the module is fully inserted and properly
seated. Make sure the latches are in the closed position (3).
Figure 2-29
Installing a DIMM
14.
Repeat steps 12 and 13 to install any additional modules.
15.
After installing the memory module(s), place the top of the display head housing onto the display
head (1), then set the bottom of the display head housing onto the display head (2).
Figure 2-30
Replacing the Display Head
ENWW
Installing Additional Memory
25