HP ap5000 Hardware Reference Guide HP ap5000 All-In-One Point of Sale System - Page 26
Replacing the Power Supply
View all HP ap5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
7. Lift the power supply and its cables out of the base of the unit. Figure 2-23 Removing the Power Supply 8. Connect the external power cord to the power supply. 9. Route the circular end of the power cord through the hole at the top of the base and connect the power cord to the power connector on the bottom I/O panel. 10. Place the power supply into the base so that it is sitting on the metal tabs inside the base. Figure 2-24 Replacing the Power Supply 20 Chapter 2 Hardware Upgrades ENWW
7.
Lift the power supply and its cables out of the base of the unit.
Figure 2-23
Removing the Power Supply
8.
Connect the external power cord to the power supply.
9.
Route the circular end of the power cord through the hole at the top of the base and connect the
power cord to the power connector on the bottom I/O panel.
10.
Place the power supply into the base so that it is sitting on the metal tabs inside the base.
Figure 2-24
Replacing the Power Supply
20
Chapter 2
Hardware Upgrades
ENWW