HP ap5000 Quick Setup & Getting Started HP ap5000 All-In-One Point of Sale - Page 11
Removing the Bottom I/O Cover
View all HP ap5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
c. If connecting peripherals to the I/O connectors under the display, remove the I/O cover by pressing downward on the two tabs at the top of the cover (1) and rotating the cover off (2). Figure 8 Removing the Bottom I/O Cover d. Route the peripheral cables through the bottom of the base and out the center hole at the top of the base before connecting. Figure 9 Routing Cables ENWW Assembling the Hardware 5
c.
If connecting peripherals to the I/O connectors under the display, remove the I/O cover by
pressing downward on the two tabs at the top of the cover (1) and rotating the cover off (2).
Figure 8
Removing the Bottom I/O Cover
d.
Route the peripheral cables through the bottom of the base and out the center hole at the top
of the base before connecting.
Figure 9
Routing Cables
ENWW
Assembling the Hardware
5