HP t1000 T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 111

94 Connection Configuration The following table discusses the functions in this dialog box. Table 13-1 TCP/IP Settings Dialog Box Function Description Use Software Compression Click on this check box to enable this function. By default, this function is activated and enabled. Use IP Header Compression Click on this check box to enable Use IP Header Compression. By default, this function is activated and enabled. Use SLIP Click on this check box to enable this function. SLIP is Serial Line Internet Protocol. By default, this function is not enabled. Use Assigned IP Address Click here to activate this text box. By default, the text entry box is not activated. Use Server-Assigned IP Addresses Click here to disable server-assigned addresses and to activate the text entry boxes for typing-in addresses. By default, the check box is checked and the text entry boxes are not activated. Use Default Gateway on Remote Network Click on this check box to enable this function. By default, the function is activated and enabled. Using the Security Settings Dialog Box Click on the Security... command button in the second dialog box of the Dial-Up Configuration Wizard to configure dial-up security. When this command button is pressed, the Security Settings dialog box displays. Figure 13-2 shows this dialog box.