HP t1000 T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 163

152 External Devices Using the Adapters Configuration Dialog Box To open this dialog box: 1. Press F2 to invoke the Terminal Properties dialog box. 2. Click on the Devices tab. 3. Double click on the Adapters icon in the icon container on the Devices properties sheet. The following table discusses the functions of the Adapters Configuration dialog box. Table 22-1 Adapters Configuration Dialog Box Function Description Adapters This is a list of all the available adapters on a terminal. Check Network on BOOT check box Check this box (default is checked) if you want the terminal to verify terminal connection to the network upon boot (a message is displayed if the test fails). If you are using an adapter that does not immediately connect to the network upon boot, you may desire to un-check the box so that the message does not appear each time the terminal boots. Accept Terminal Name from DHCP check box Some (but not all) DHCP servers can assign a terminal name through DHCP option 12. If your DHCP server has this capability, check this box if you want your terminal to use this assigned name (default is Not Checked). Properties... Click on this command button to invoke a properties dialog box. In the properties dialog box are the IP Address properties sheet and the Name Server properties sheet. The following sections discuss these properties sheets.