HP t1000 T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 132

118 Connection Configuration The following table discusses the functions of a Telnet connection. Table 17-1 TCP/IP Telnet Configuration Function Description Host Port Number Enter the Telnet host port number. The default is 23. Local Port Number Implemented to allow connection to Misys hosts. This allows the host to communicate back to the emulator on a different port than the emulator uses to talk to the host. The default is 0. Telnet Name Enter the Telnet virtual terminal name. The default depends on emulation (VT400, 7-bit, default is vt420). Suppress Use the functions of this group box as needed (controls in this area become active depending on the type of emulation selected): • Echo (default) • 3270 Regime • TN3270E • TN5250E Force Negotiation Use the Binary and EOR drop-down scroll lists to configure negotiation parameters. The default for Binary is No and the default for EOR is No. Break Settings Use the TM with Break and CR with Break check boxes to configure break settings.