HP t1000 T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 227

222 Firmware Upgrades The Upgrade Process 1. Press the F2 key for the Terminal Properties dialog box. 2. Click on the Network tab. 3. Click on the Obtain an IP Address From DHCP Server radio button, if the function is not enabled. 4. Click on the Apps tab. 5. Click on the DHCP Automatic Update Enable check box on the Apps properties sheet, if the function is not enabled. Note You have now enabled the automatic DHCP function. You will also need to configure your DHCP option IDs. Make sure your DHCP options match the options on the DHCP server. 6. If you want to change the DHCP option ID values, click on the Change DHCP Option... command button. 7. Use the Change Option IDs dialog box to change options, then click on OK to save. Note Pay special attention to these FTP Option IDs functions: File Server (the location of the server where the firmware resides), and File Root Path (the location of the firmware). If they are not correct, the upgrade will fail. Note You will need the image and the params.ini files on the FTP server to do the upgrade. 8. Shut down the terminal. See "Shutting Down the Terminal" for more information. Your terminal will automatically upgrade itself when it is turned on again.