HP t1000 T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 172
in Modem AT Commands.
View all HP t1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
162 External Devices Table 25-1 Add or Change Modem Dialog Box Function Description Modem Name This field displays the brand name of the modem in your system. Init Commands Enter a modem initialization command string in this field. The default is ATE0V1&C1&D1. Flow Settings Use this group box to set the following flow settings: Flow Hardware Enter a flow hardware command string in this field. The default is AT&K3. Flow Software Enter a flow software command string in this field. The default is AT&K4. Flow Off Enter a flow hardware command string in this field. The default is AT&K0. Note The Hayes command set is discussed in greater detail in "Modem AT Commands."
162
External Devices
Note
The Hayes command set is discussed in greater detail
in “Modem AT Commands.”
Table 25-1
Add or Change Modem Dialog Box
Function
Description
Modem Name
This field displays the brand name of the modem in
your system.
Init Commands
Enter a modem initialization command string in this
field. The default is
ATE0V1&C1&D1<cr>
.
Flow Settings
Use this group box to set the following flow settings:
Flow Hardware
Enter a flow hardware command string in this field. The
default is
AT&K3<cr>
.
Flow Software
Enter a flow software command string in this field. The
default is
AT&K4<cr>
.
Flow Off
Enter a flow hardware command string in this field. The
default is
AT&K0<cr>
.