Hitachi 55HDT51 Owners Guide - Page 36

THE REMOTE CONTROL HOW TO USE THE REMOTE TO CONTROL YOUR PLASMA TV IEEE1394 Use this function to control your devices with digital interface capability. Press the INPUTS button, CURSOR PAD and SELECT button to select IEEE 1394. (When an IEEE1394 device is not connected) INPUTS Input 5 RGB IEEE 1394 Photo Input Ant B Move SEL Sel. (When an IEEE1394 device is connected) Device not detected INPUTS Input 5 RGB IEEE 1394 Photo Input Ant B Move SEL Sel. DVHS1 POWER 00:00:00 ANT Move In/Out: TV SEL Select TV [DEVICE MAKER DEVICE MODEL ] Counter : 00:11:30 DVHS1 POWER 00:00:00 ANT Move In/Out: TV SEL Select TV Use CURSOR PAD ̆ , ̄ to highlight connected device (example D-VHS1). Use CURSOR PAD ̈ to select connected device (example D-VHS1). Use CURSOR PAD cursors to highlight POWER. Press the SELECT button to power on the device. Use CURSOR PAD cursors to select D-VHS operation. Press down on the CURSOR PAD to enable the selected operation. Use CURSOR PAD cursors to highlight the TV IN/OUT operation. Press down on CURSOR PAD to select: TV IN is DVHS TV OUT is ANT A NOTES: 1. The digital device will be automatically recognized if properly connected. 2. Four (4) IEEE1394 devices can be listed on the menu, but only 1 device at a time can be used. If a fifth device is connected, it will replace the first device on the menu list. 3. This TV's IEEE1394 connection is not compatible with a DV camcorder (Digital Video Camcorder) or a PC. 4. The On-Screen-Display will not disappear until the EXIT button is pressed. 5. Not all devices with IEEE1394 capability are compatible with this TV. Any compatibility problems with other manufacturers devices should be brought to the attention of those manufacturers. 6. TV IN/OUT functions are not available when DVHS is in playback or recording. 36