Honeywell HJZTP User Manual - Page 24
DVR/Multiplexer/Camera Connection
View all Honeywell HJZTP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
3.3.2 DVR/Multiplexer/Camera Connection Note: The DVR/multiplexer/camera connection can only be set from the master keyboard. The DVR/MUX menu can be viewed on a slave keyboard, but 'AUX = SET' will not be displayed, and no editing will be allowed. To ensure slave keyboards have the correct DVR/multiplexer/camera connection configuration, they must be set as slave keyboards, and connected to the master keyboard before editing the configuration on the master keyboard. Alternately, entering and exiting the DVR/MUX menu on the master keyboard, or powering up the master keyboard, will resend the configuration to the slave keyboards. By default the keyboard it is set to control eight 16-way DVRs, and eight 16-way multiplexers. With cameras 1 to 16 connected to DVR 1 and multiplexer 1, cameras 17 to 32 connected to DVR 2 and multiplexer 2, etc., up to cameras 113 to 128 connected to DVR 8 and multiplexer 8. The keyboard can control 1, 4, 9 and 16-way DVRs and/or 4, 9, 16-way multiplexers To set the DVR/multiplexer/camera connection, select 'DVR / MUX' in the keyboard setup menu. The following menu will be displayed: AUX = C A M1 S E T L OCK = E ND DVR 1 MU X 1 The menu shows that camera 1 is connected to DVR 1 and Multiplexer 1. The number '1' next to 'DVR' will be flashing indicating that this number will be edited by pressing the 'aux' key. Use the joystick up and down or the 'F1' ('') and 'F2' ('') keys, to scroll through all 128 cameras. Use the joystick left and right or the 'F3' ('') and 'F4' ('') keys (or 'camera' and 'preset' keys) to select the DVR or MUX number. Pressing the 'aux' key will cycle through all legal settings of the selected DVR or multiplexer number. 'NO', indicates no DVR or no multiplexer is connected to the camera. The menu only allows cameras be assigned to DVRs in blocks of 1, 4, 9 or 16, or to Multiplexers in blocks of 4, 9 or 16, to correspond with 1, 4, 9 or 16-way DVRs/Multiplexers. If 'AUX = SET' is not displayed, then there are no legal alternatives to the number already displayed, and so the number cannot be edited. Rev. 1.01 14 900.0570 8-Sept-05