Hoover FH50240RM Product Manual - Page 12

TO CLEAN HARD FLOORS (CONTINUED) Rinsing is not necessary, but will help remove detergent residue from the floor. 10. Empty recovery tank when the motor sound becomes higher pitched and there is a loss in suction (see "Automatic shut-off', Fig. 2.19). 11. When finished cleaning, follow "After cleaning" instructions on page 12. Unplug cleaner from electrical outlet and remove squeegee from nozzle. Rinse it in clear water. (Reference Figs. 2.13 - 2.17) AFTER CLEANING Allow carpet or upholstery to dry. To help prevent matting and resoiling the carpet, keep children and pets away from surface until it is completely dry. If it is necessary to walk on damp carpet, place towels or white cloths on the traffic areas. If furniture must be replaced before the carpet is dry, place plastic or aluminum foil under legs of furniture so metal slides or wood finishes will not stain the carpet. Empty tanks, rinse with clean water and let air dry. Rinse the Dirty Water Tank lid and let air dry. Filter Screens A • IMPORTANT • 3.5 To keep performance of your machine at peak level remove nozzle (Fig. 5.1) and check filter screens (A) located inside the base of the unit and remove lint or debris. TOOLS 4.1 4. TOULS A. SpinScrub® Hand Tool (Available on select B models only) has rotating brush for extra scrubbing action on small carpet areas, carpeted stairs and upholstery. For some models, the brushes can be removed for converting to the scrub module. (Available on select models only) B. Stair/Upholstery Nozzle has a built-in brush to help provide the scrubbing action some spots may need for removal. SPINSCRUB® HAND TOOL (Available on select models only) 4.2 4.2 To remove the SpinScrub® hand tool pull 0 tool up and outward. To reposition the tool, reverse this procedure. Actual model may vary from images shown. 12