Hoover FH50240RM Product Manual - Page 9

Important

Page 9 highlights

AUTOMATIC SHUT OFF When the Dirty Water Tank (lower tank) is full the automatic shut off mechanism will shut off the cleaner suction (suction will be noticeably reduced). 2.19 At that time, the yellow float disk will rise to the top of the Dirty Water Tank lid (B). The cleaner will no longer pick up dirty solution and the motor sound will become noticeably higher in pitch. When this happens, turn cleaner off and empty Dirty Water Tank before continuing use. Check clean water tank also; it may need to be refilled. Do not use without float and float retainer in place. If broken or dislodged, take to an Authorized Dealer for repair. 3. HOW TO CLEAN. BEFORE YOU BEGIN CLEANING a. Vacuum thoroughly - For carpet, use a HOOVER° vacuum cleaner with an agitator for best results. Vacuum upholstery with a vacuum cleaner with cleaning tool attachments. Use a crevice tool to reach into tufts and folds. • IMPORTANT • Do not use the carpet cleaner as a dry vacuum cleaner. b. For upholstery, check cleaning code - Use you HOOVER° carpet cleaner only if the upholstery fabric is marked with a "W" (for "wet' clean) or "S/W" (for "solvent/dry" or 'Wet" clean). Do not clean fabric marked "S" ("solvent/dry" clean only). If your upholstery does not have a code, seek professional assistance. f. To prevent staining, use plastic or aluminum foil to protect wood or metal surfaces from possible water spray. g. To avoid wetting and possible damage to wood floors undemeath area rugs/carpet, either move area rugs/ carpet to a non-wood hard floor surface or place waterproof material (e.g.plastic) underneath them before cleaning. *Available at additional cost if not included with your model. c. Test for colorfastness - Wet a white absorbent cloth with the detergent. In a small, hidden area, gently rub the surface with the dampened cloth. Wait ten minutes and check for color removal or bleed with white paper towel or cloth. If surface has more than one color, check all colors. d. When cleaning entire floor, move fumiture out of area to be cleaned (may not be necessary if only high traffic areas are to be cleaned). For furniture too heavy to move, place aluminum foil or wax paper under legs. This will prevent wood finishes from staining carpet. Pin up fumiture skirts and draperies. e. Pretreat spots and heavy traffic areas with HOOVER® Spot & Stain Spray Cleaner*- Follow Directions on bottle. 9 Actualmodelmay vary from images shown.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38

AUTOMATIC
SHUT
OFF
When
the
Dirty
Water
Tank
(lower
tank)
is
full
the
automatic
shut
off
mechanism
will
shut
off
the
cleaner
suction
(suction
will
be
noticeably
reduced).
2.19
At
that
time,
the
yellow
float
disk
will
rise
to
the
top
of
the
Dirty
Water
Tank
lid
(B).
The
cleaner
will
no
longer
pick
up
dirty
solution
and
the
motor
sound
will
become
noticeably
higher
in
pitch.
When
this
happens,
turn
cleaner
off
and
empty
Dirty
Water
Tank
before
continuing
use.
Check
clean
water
tank
also;
it
may
need
to
be
refilled.
Do
not
use
without
float
and
float
retainer
in
place.
If
broken
or
dislodged,
take
to
an
Authorized
Dealer
for
repair.
3.
HOW
TO
CLEAN.
BEFORE
YOU
BEGIN
CLEANING
a.
Vacuum
thoroughly
-
For
carpet,
use
a
HOOVER°
vacuum
cleaner
with
an
agitator
for
best
results.
Vacuum
upholstery
with
a
vacuum
cleaner
with
cleaning
tool
attachments.
Use
a
crevice
tool
to
reach
into
tufts
and
folds.
IMPORTANT
Do
not
use
the
carpet
cleaner
as
a
dry
vacuum
cleaner.
b.
For
upholstery,
check
cleaning
code
-
Use
you
HOOVER°
carpet
cleaner
only
if
the
upholstery
fabric
is
marked
with
a
"W"
(for
"wet'
clean)
or
"S/W"
(for
"solvent/dry"
or
'Wet"
clean).
Do
not
clean
fabric
marked
"S"
("solvent/dry"
clean
only).
If
your
upholstery
does
not
have
a
code,
seek
professional
assistance.
c.
Test
for
colorfastness
-
Wet
a
white
absorbent
cloth
with
the
detergent.
In
a
small,
hidden
area,
gently
rub
the
surface
with
the
dampened
cloth.
Wait
ten
minutes
and
check
for
color
removal
or
bleed
with
white
paper
towel
or
cloth.
If
surface
has
more
than
one
color,
check
all
colors.
d.
When
cleaning
entire
floor,
move
fumiture
out
of
area
to
be
cleaned
(may
not
be
necessary
if
only
high
traffic
areas
are
to
be
cleaned).
For
furniture
too
heavy
to
move,
place
aluminum
foil
or
wax
paper
under
legs.
This
will
prevent
wood
finishes
from
staining
carpet.
Pin
up
fumiture
skirts
and
draperies.
e.
Pretreat
spots
and
heavy
traffic
areas
with
HOOVER®
Spot
&
Stain
Spray
Cleaner*-
Follow
Directions
on
bottle.
f.
To
prevent
staining,
use
plastic
or
aluminum
foil
to
protect
wood
or
metal
surfaces
from
possible
water
spray.
g.
To
avoid
wetting
and
possible
damage
to
wood
floors
undemeath
area
rugs/carpet,
either
move
area
rugs/
carpet
to
a
non
-wood
hard
floor
surface
or
place
waterproof
material
(e.g.
plastic)
underneath
them
before
cleaning.
*Available
at
additional
cost
if
not
included
with
your
model.
9
Actual
model
may
vary
from
images
shown.