Hotpoint RB790DPWW Owners Manual - Page 32

Before you call for service... Troubleshooting Tips Oven--All Models Oven light does not work Possible Causes Light bulb is loose or defective. What To Do • Tighten or replace the bulb. Switch operating light is broken. • Call for service. Oven will not work Plug on range is not completely inserted in the electrical outlet, A fuse in your home may be blown or the circuit breaker tripped. Oven controls improperly set. • Hake sure electrical plug is plugged into a live, properly grounded outlet. • Replacefuse or reset circuit breaker. • See the Using the oven section. On self-cleaning models, door left in the locked position. • If necessary,allow the oven to cool then unlock the door. Food does not bake or roast properly Oven controls improperly set. Rack position is incorrect or the rack is not level. Incorrect cookware or cookware of improper size being used. Oven thermostat needs adjustment, • See the Using the oven section. • See the Using the oven section. • See the Using the oven section. • See the Adjust the oven thermostat-Easy to do yourself! section. Food does not broilproperly Oven is not set to BROIL. Improper reck position being used. • On models with u temperature knob, make sure you turn it all the way to the BROILposition. On models with a BROIL HI/LO pad, make sure it is turned on. • See the Broiling guide. Food being cooked in a hot pan. • For best results, use a pan designed for broiling. Hake sure it is cool. Cookware not suited for broiling. • For best results, use a pan designed for broiling. In some areas the power (voltage} may be low. • Preheat the broil element for 10 minutes. • Broil for the longest period of time recommended in the Broiling guide. Control signals after entering cooking time or delay start You forgot to enter a bake temperature or cleaning time. • Pressthe BAKEpod and desired temperature or the SELFCLEANpad and desired clean time. loud tone The installed connection from the house to the unit is miswired. • Contact installer or electrician to correct miswire. A fuse in your home may be blown or the circuit breaker tripped. The oven is self-cleaning. Controls improperly set. • Replacethe fuse or reset the circuit breaker. ° Wait for the self-clean cycle to finish and the oven to cool. ° See the Using the warming drawer section.