Huawei HG232f User Guide - Page 48

SSID1, mySSID, WPA-PSK/WPA2-PSK, MyPassword@2012, Repeater, coverage of a WLAN.

Get Huawei HG232f PDF manuals and user guides View all Huawei HG232f manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

HG232f 300Mbps Wireless Router User Guide 5 Configuring Frequently Used Functions  The security modes set on the two wireless routers can be different but the encryption modes should be the same.  The SSIDs of the two WLANs can be different but it is recommended that the two WLANs use the same SSID. Thus, wireless terminals can use one SSID to connect to the WLAN that is expanded.  If the repeater mode is used for expanding the coverage of a WLAN, note that: − The IP addresses of the LAN interfaces of the two routers should be in the same network segment. In addition, the IP addresses should be different. − Enable the DHCP server function only on the wireless router that is used to connect to uplink devices. Disable the DHCP function and enable the DHCP relay function on other wireless routers. Configuration Example For example, you have router A in your spacious house. The signals of router A cannot cover the area that is far from the router. In this case, you can add another router, that is, router B. By configuring the WDS function on the two routers, you can expand the coverage of a WLAN. The parameters of the routers are planned as follows: Router A:  Set the IP address of the LAN interface to 192.168.3.166 (default value).  Set the subnet mask of the LAN interface to 255.255.255.0 (default value).  Enable the DHCP server function (default value).  Select SSID1 for SSID (default value).  Set the name of SSID1 to mySSID.  Set the WLAN channel to 1.  The WLAN encryption settings are as follows: − Set the security mode to WPA-PSK/WPA2-PSK. − Set the encryption mode to AES. − Set the password used for accessing the WLAN to MyPassword@2012.  Enable the WDS function and set the WDS mode to Repeater.  Add the wireless MAC address of router B to the WDS MAC list. Router B:  Set the IP address of the LAN interface to 192.168.3.88. 5-21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
HG232f 300Mbps Wireless Router
User Guide
5 Configuring Frequently Used Functions
5-21
The security modes set on the two wireless routers can be different but the encryption
modes should be the same.
The SSIDs of the two WLANs can be different but it is recommended that the two
WLANs use the same SSID. Thus, wireless terminals can use one SSID to connect to the
WLAN that is expanded.
If the repeater mode is used for expanding the coverage of a WLAN, note that:
−
The IP addresses of the LAN interfaces of the two routers should be in the same
network segment. In addition, the IP addresses should be different.
−
Enable the DHCP server function only on the wireless router that is used to
connect to uplink devices. Disable the DHCP function and enable the DHCP
relay function on other wireless routers.
Configuration Example
For example, you have router A in your spacious house. The signals of router A cannot
cover the area that is far from the router. In this case, you can add another router, that is,
router B. By configuring the WDS function on the two routers, you can expand the
coverage of a WLAN.
The parameters of the routers are planned as follows:
Router A:
Set the IP address of the LAN interface to
192.168.3.166
(default value).
Set the subnet mask of the LAN interface to
255.255.255.0
(default value).
Enable the DHCP server function (default value).
Select
SSID1
for
SSID
(default value).
Set the name of
SSID1
to
mySSID
.
Set the WLAN channel to
1
.
The WLAN encryption settings are as follows:
−
Set the security mode to
WPA-PSK/WPA2-PSK
.
−
Set the encryption mode to
AES
.
−
Set the password used for accessing the WLAN to
MyPassword@2012
.
Enable the WDS function and set the WDS mode to
Repeater
.
Add the wireless MAC address of router B to the WDS MAC list.
Router B:
Set the IP address of the LAN interface to
192.168.3.88
.