Husqvarna 130L Owner Manual - Page 11

Caution, Warning

Get Husqvarna 130L PDF manuals and user guides View all Husqvarna 130L manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

Premixed fuel • Use Husqvarna premixed alkylate fuel for best performance and extension of the engine life. This fuel contains less harmful chemicals compared to regular fuel, which decreases harmful exhaust fumes. The quantity of remains after combustion is lower with this fuel, which keeps the components of the engine more clean. To mix fuel Gasoline • Use good quality unleaded gasoline with a maximum of 10% ethanol contents. CAUTION: Do not use gasoline with an octane grade less than 90 RON/87 AKI. Use of a lower octane grade can cause engine knocking, which causes engine damages. Two-stroke oil • For best results and performance use Husqvarna two-stroke oil. • If Husqvarna two-stroke oil is not available, use a two-stroke oil of good quality for air-cooled engines. Speak to your servicing dealer to select the correct oil. CAUTION: Do not use two- stroke oil for water-cooled outboard engines, also referred to as outboard oil. Do not use oil for four-stroke engines. To mix gasoline and two-stroke oil Gasoline, liter 5 10 15 20 US gallon 1 2 1/2 5 Two-stroke oil, liter 2% (50:1) 0.10 0.20 0.30 0.40 US fl. oz. 2 ½ 6 ½ 12 ⅞ CAUTION: Small errors can influence the ratio of the mixture drastically when you mix small quantities of fuel. Measure the quantity of oil carefully and make sure that you get the correct mixture. 1. Fill half the quantity of gasoline in a clean container for fuel. 2. Add the full quantity of oil. 3. Shake the fuel mixture. 4. Add the remaining quantity of gasoline to the container. 5. Carefully shake the fuel mixture. CAUTION: Do not mix fuel for more than 1 month at a time. To fill the fuel tank WARNING: Obey the procedure that follows for your safety. 1. Stop the engine and let the engine become cool. 2. Clean the area around the fuel tank cap. 3. Shake the container and make sure that the fuel is fully mixed. 4. Remove the fuel tank cap slowly to release the pressure. 5. Fill the fuel tank. CAUTION: Make sure that there is not too much fuel in the fuel tank. The fuel expands when it becomes hot. 6. Tighten the fuel tank cap carefully. 7. Clean fuel spillage on and around the product. 1687 - 003 - 22.09.2021 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Premixed fuel
•
Use Husqvarna premixed alkylate fuel for best
performance and extension of the engine life.
This fuel contains less harmful chemicals
compared to regular fuel, which decreases
harmful exhaust fumes. The quantity of remains
after combustion is lower with this fuel, which
keeps the components of the engine more clean.
To mix fuel
Gasoline
•
Use good quality unleaded gasoline with a
maximum of 10% ethanol contents.
CAUTION:
Do not use gasoline
with an octane grade less than 90
RON/87 AKI. Use of a lower octane
grade can cause engine knocking,
which causes engine damages.
Two-stroke oil
•
For best results and performance use Husqvarna
two-stroke oil.
•
If Husqvarna two-stroke oil is not available, use a
two-stroke oil of good quality for air-cooled
engines. Speak to your servicing dealer to select
the correct oil.
CAUTION:
Do not use two-
stroke oil for water-cooled outboard
engines, also referred to as outboard
oil. Do not use oil for four-stroke
engines.
To mix gasoline and two-stroke oil
Gasoline, liter
Two-stroke
oil, liter
2% (50:1)
5
0.10
10
0.20
15
0.30
20
0.40
US gallon
US fl. oz.
1
2 ½
2 1/2
6 ½
5
12 ⅞
CAUTION:
Small errors can
influence the ratio of the mixture
drastically when you mix small quantities
of fuel. Measure the quantity of oil
carefully and make sure that you get the
correct mixture.
1.
Fill half the quantity of gasoline in a clean
container for fuel.
2.
Add the full quantity of oil.
3.
Shake the fuel mixture.
4.
Add the remaining quantity of gasoline to the
container.
5.
Carefully shake the fuel mixture.
CAUTION:
Do not mix fuel for more
than 1 month at a time.
To fill the fuel tank
WARNING:
Obey the procedure
that follows for your safety.
1.
Stop the engine and let the engine become cool.
2.
Clean the area around the fuel tank cap.
3.
Shake the container and make sure that the fuel
is fully mixed.
4.
Remove the fuel tank cap slowly to release the
pressure.
5.
Fill the fuel tank.
CAUTION:
Make sure that there
is not too much fuel in the fuel tank.
The fuel expands when it becomes
hot.
6.
Tighten the fuel tank cap carefully.
7.
Clean fuel spillage on and around the product.
1687 - 003 - 22.09.2021
11