Husqvarna P-ZT6126 Owners Manual - Page 31
Running, into the desired hole. Release deck height control
View all Husqvarna P-ZT6126 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
OPERATION Running 1. Release the parking brake by moving the lever downward. NOTE: The mower is equipped with an operator presence system. When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine. 2. Move the steering controls to the neutral position (N). 3. The cutting height can be set from 1"- 5½" (2.5 cm-14 cm) by setting the cutting height pin into the desired hole. Release deck height control by pushing forward on the pedal. Release the parking brake 8065-006 Deck lift pedals 4. Set pin at desired cutting height. (Pin is removed by rotating 180O.) Push pedal again to lower deck to selected setting. 8065-087 Set deck to selected cutting height 8065-090 31