Husqvarna P-ZT6126 Owners Manual - Page 47
Wheel and Deck Zerks, Front Wheel Mount, Front Wheel Bearings, Deck Spindle
View all Husqvarna P-ZT6126 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
LUBRICATION Wheel and Deck Zerks Use only good quality bearing grease. Grease from well-known brand names (petrochemical companies, etc.) usually maintains a good quality. Front Wheel Mount Remove dust cap to expose zerk. Lubricate with a grease gun until the grease is forced out around the top washer. Front Wheel Bearings Lubricate 3-4 strokes with a grease gun on each set of wheel bearings. Lubricating front wheels Deck Spindle Lower the cutting deck completely. If a grease gun without rubber hose is used, the foot plate must be removed. Lubricate with a grease gun, 2-3 strokes per spindle. 8065-032 Deck spindle 8058-131 47
47
lUbRICatIon
47
Wheel and Deck Zerks
Use only good quality bearing grease.
Grease from well-known brand names (petrochemical
companies, etc.) usually maintains a good quality.
Front Wheel Mount
Remove dust cap to expose zerk. Lubricate with a
grease gun until the grease is forced out around the
top washer.
Front Wheel Bearings
Lubricate 3-4 strokes with a grease gun on each set of
wheel bearings.
8065-032
Lubricating front wheels
8058-131
Deck spindle
Deck Spindle
Lower the cutting deck completely.
If a grease gun without rubber hose is used, the foot
plate must be removed.
Lubricate with a grease gun, 2-3 strokes per spindle.