IBM 84903bu User Manual - Page 31
Installation
UPC - 000435882073
View all IBM 84903bu manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
v Check the instructions that come with the drive to see whether you have to set any switches or jumpers on the drive. If you are installing a SAS device, be sure to set the SAS ID for that device. v Diskette drives, tape drives, CD drives, CD-RW drives, and DVD/CD-RW combo drives are examples of removable-media drives. You can install removable-media drives in bays 1, 2, and 3 only. v To install a 3.5-in. drive in a 5.25-in. bay, you must use the 5.25-in. conversion kit. v Only a 3.5-in. device can be installed in bay 3. v The server supports only one diskette drive. v The electromagnetic interference (EMI) integrity and cooling of the server are protected by having all bays and PCI, PCI Express, and PCI-X slots covered or occupied. When you install a drive or PCI, PCI Express, or PCI-X adapter, save the EMC shield and filler panel from the bay or the PCI, PCI Express, or PCI-X adapter slot cover in the event that you later remove the option. v For a complete list of supported options for the server, see http://www.ibm.com/ servers/eserver/serverproven/compat/us/. Installing a drive in bay 2 or 3 EMC shield Filler panel Drive retainer clip To install a drive in bay 2 or 3, complete the following steps: 1. Read the safety information that begins on page v and "Installation guidelines" on page 7. 2. Turn off the server and peripheral devices, and disconnect the power cords and all external cables. 3. Remove the side cover (see "Removing the side cover" on page 10). 4. Remove the two-piece bezel (see "Removing the two-piece bezel" on page 11). Chapter 2. Installing options 17