IBM 84903bu User Manual - Page 40
User's, Guide, xSeries, Documentation
UPC - 000435882073
View all IBM 84903bu manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
v The server scans PCI Express x1 slot 2, PCI Express x8 slot 1, and PCI slots 3 and 4 to assign system resources. If the optional PCI-X expansion card is attached to the system board, the server also scans PCI-X slots 5 and 6 to assign additional system resources. Then, the server starts the PCI devices in the following order, if you have not changed the default startup sequence: PCI Express x8 slot 1, PCI-X slot 5 (optional), PCI-X slot 6 (optional), PCI Express x1 slot 2, PCI slot 3, and PCI slot 4. v For a list of supported options for the server, see http://www.ibm.com/servers/ eserver/serverproven/compat/us/. For the locations of the expansion slots on the system board and the optional PCI-X expansion card, see the User's Guide on the IBM xSeries Documentation CD. Attention: Static electricity that is released to internal server components when the server is powered-on might cause the server to stop, which could result in the loss of data. To avoid this potential problem, always use an electrostatic-discharge wrist strap or other grounding system when working inside the server with the power on. Expansion-slot cover Adapter Left side Front adapter retention bracket Right side To install an adapter, complete the following steps: 26 xSeries 206m Types 8485 and 8490: Installation Guide