IBM 84903bu User Manual - Page 73
technician
UPC - 000435882073
View all IBM 84903bu manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Table 2. Abbreviated list of POST error codes (continued) v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. v See the parts listing in the Problem Determination and Service Guide to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU). v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician. Error code Description Action 1962 A drive does not contain a valid boot sector. 1. Make sure that a bootable operating system is installed. 2. Run the hard disk drive diagnostic tests (see "Running the diagnostic programs" in the Problem Determination and Service Guide on the IBM xSeries Documentation CD). 3. Reseat the following components, depending on the server model: v Hot-swap models: a. Hard disk drive b. Mini-PCI-X adapter cable c. Mini-PCI-X adapter d. PCI-X expansion card v Simple-swap models: a. Hard disk drive b. Hard disk drive cable v Non-hot-swap models: hard disk drive cable 4. Replace the following components one at a time, depending on the server model, in the order shown, restarting the server each time: v Hot-swap models: a. Hard disk drive b. Mini-PCI-X adapter cable c. SAS backplane d. Mini-PCI-X adapter e. PCI-X expansion card v Simple-swap and non-hot-swap models: a. Hard disk drive b. Hard disk drive cable 5. (Trained service technician only) Replace the system board. Chapter 5. Solving problems 59