Icom ID-880H Instruction Manual - Page 108
Memory channel programming
View all Icom ID-880H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
7 MEMORY/CALL CHANNELS Memory channel programming q Push [VFO/MHz] to select the VFO mode. w Set the desired frequency: ± Select the desired band with [BAND]. ± Set the desired frequency with [DIAL]. ± Set other data (e.g. frequency offset, duplex direction, tone squelch, current call signs, etc.), if desired. e Push [S.MW] to enter the select memory write mode. • "X" indicator and the memory channel number blink. r Rotate [DIAL] to select the desired channel. • Call channels (C0, C1), VFO and scan edge channels (0A/0B to 24A/24B), as well as regular memory channels, can be programmed in this way. t Push and hold [MW](S.MW) for 1 sec. to program. • 3 beeps sound. • Memory channel number automatically increases when continuing to push [MW](S.MW) after programming. NOTE: Push [MENU ] to cancel to program and exit the select memory write mode before memory programming is finished. FOR YOUR CONVENIENCE Memory programming can be performed in various ways e.g. memory channel to the different memory channel, memory channel to the call channel, etc. [EXAMPLE]: Programming 145.870 MHz into memory channel 20 (blank channel). Push [S.MW]. Rotate [DIAL] to select channel 20. [DIAL] [S.MW ] VFO mode Enter select memory write mode. Push and hold [MW] for 1 sec. to program Channel 20 Return to the VFO mode. 90