Icom ID-880H Instruction Manual - Page 141
SCAN mode items
View all Icom ID-880H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
MENU SCREEN OPERATION 10 SCAN mode items D Priority watch Activates priority watch or priority watch with alert (Bell). • OFF : The priority watch is turned OFF. (default) • ON : The transceiver checks the memory channel frequency every 5 sec. • BELL : The transceiver checks the memory channel frequency every 5 sec. You can be alerted with beeps and blinking "S." D Scan pause timer Selects the scan pause time. When receiving signals, the scan pauses according to the scan pause time. • 2-20SEC : Scan pauses for 2-20 sec. on a received signal in 2 sec. steps. (default: 10 sec.) • HOLD : Scan pauses on a received signal until it disappears. 1 D Scan resume timer 2 Selects the scan resume time from a pause after the received 3 signal disappears. 4 • 0SEC : Scan resumes when a received signal disap- pears. 5 • 1-5SEC : Scan pauses 1-5 sec. after a received signal 6 disappears. (default: 2 sec.) • HOLD : Scan remains paused on the received signal 7 according to the scan pause timer even if it 8 disappears. Rotate [DIAL] to resume manu- ally. 9 10 11 Scan resume timer must be set shorter than scan pause 12 timer (previous item), otherwise this timer does not function. 13 D Program skip scan 14 Sets programmed skip scan function ON (default) and OFF 15 for VFO scan (full scan, programmed scan, etc.) operation. 16 17 18 19 123