Icom ID-880H Instruction Manual - Page 60

5 DV MODE OPERATION Digital mode operation The ID-880H can be operated in digital voice mode and lowspeed data operation for both transmit and receive. It can also be connected to a GPS receiver (compatible with an RS232 output/NMEA format/4800 bps/9600 bps) to transmit/receive position data. Current call sign setting Set the current call sign for DV operation as follows. q Enter "CALL-S" in the MENU screen. MENU ¶ CALL-S (Push [MENU ]), (rotate [DIAL], then push [ ](MONI).) • Call sign screen is displayed. w Rotate [DIAL] to select the desired call sign group, "UR," RPT1," "RPT2" or "MY," then push [ ](MONI). • Current call sign is displayed. Quick entry Push [CS] to enter the current call sign mode. See next page for details. • Call sign group UR : Station call signs (U01-U60), "CQCQCQ" (U--) or repeater CQ* (R-L) can be selected. * '/' plus repeater call sign (R-L), '/' stands for "CQCQCQ" RPT1 : "NOTUSE"* (R--) or repeater call signs (R-L) can be selected. * Direct communication (NOT USE repeater) RPT2 : "NOTUSE"* (R--) or repeater call signs (R-L) can be selected. * Direct communication or using area repeater only (NOT USE linked repeater) MY : My call signs (MY1-MY6) can be selected. e Rotate [DIAL] to select the desired call sign. Or push [ ](LOW) to enter the current call sign programming state (pgs. 31-33). • When "UR," "RPT1" or "RPT2" is selected at step w, push [BAND] several times to select the repeater call sign groups. • When repeater call sign is selected at step w, push [M/CALL] to toggle the call sign and repeater name indications. r Push [ ](MONI) to set the selected call sign to the current call sign and exit the state. t Repeat steps w to r to set the other current call sign. y Push [MENU ] to return to frequency indication. 42