Icom ID-880H Instruction Manual - Page 74
Simplex operation in the VFO
View all Icom ID-880H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
5 DV MODE OPERATION Simplex operation in the VFO D Sending CQ q Set the desired frequency. (pgs. 14, 15) • Select output power, if desired. (p. 18) w Set the current MY call sign to your own call sign. (p. 42) e Set the current UR call sign. (p. 42) UR call sign selection q Push and hold [UR](DR) for 1 sec. to enter UR call sign selection mode. • Push [BAND] several times to select "GRP CQ" (CQCQCQ) "GRP UR" (UR call sign memories) and "CS" (current call sign). • The DV mode is automatically selected. w Rotate [DIAL] to select "CQCQCQ." t Release [PTT] to return to receive. • The other station's call sign will be received. • Received call signs can be stored into the received call record automatically. See page 44 for details. • Current call sign setting example (Simplex CQ) CQ UR MY call signɿ JA3YUA MY [DIAL] [BAND] [UR] e Push [UR](DR) to return to frequency indication mode. r Push and hold [PTT] to transmit and speak into the micro- phone at normal voice level. • "$" appears and the RF meter shows the output power. • "CQCQCQ" is displayed and scrolled in sequence on the fre- quency display depending on "TX CS" setting (p. 136). 56 R1: NOT USE R2: NOT USE Confirmation q Push [CS] to enter the current call sign mode. • Current UR call sign is displayed. w Rotate [DIAL] to select and confirm the other current call sign. • ("UR"), "R1," "R2" and "MY" appears in sequence.