Icom ID-880H Instruction Manual - Page 173
Data cloning - programming cable
View all Icom ID-880H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
OTHER FUNCTIONS 13 Data cloning AT POWER ON D Cloning between transceivers The ID-880H has transceiver-to-transceiver data cloning capability. This function is useful when you want to copy all of the programmed contents from one ID-880H to another. • A optional OPC-474 CLONING CABLE is required. q Connect the optional OPC-474 cloning cable to the [SP] jack of the master and sub-transceivers. • The master transceiver is used to send data to the sub-transceiver. to [SP] jack to [SP] jack Optional OPC-474 w While pushing and holding [M/CALL], turn power ON to enter cloning mode (master transceiver only- power on only for sub-transceiver). • "CLONE" appears and the transceivers enter the clone standby condition. [M/CALL] e Push [M/CALL] on the master transceiver. • "CL OUT" appears in the master transceiver's display and the bar meter shows that data is being transferred to the sub-transceiver. • "CL IN" appears automatically in the sub-transceiver's display and the bar meter shows that data is being received from the master transceiver. [M/CALL] r When cloning is finished, turn power OFF, then ON to exit cloning mode. • "CL END" appears automatically in the sub-transceiver's display after the cloning is completed. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 155