Icom IP730D Instruction Manual - Page 17

3 USING THE CELLULAR MODE Advanced operation (Continued) DDToggling the SIM card The transceiver has two SIM card slots, SIM 1 and SIM 2. You can toggle which SIM card to use in the Detailed Set mode. 1. Turn OFF the transceiver, if it is turned ON. 2. While holding down [Address] and [FUNC], rotate [VOL] to turn ON the transceiver. ••The Detailed Set Mode is displayed. LLRelease the finger from keys when "SET (Detail)" is displayed. 3. Rotate Rotary Selector or push [▲] or [▼] to select an item group "Cellular," and then push [FUNC]. SET(Detail) SET MODE Cellular 4. Push [Address] or [FUNC] several times to select "SIM Selection." 5. Rotate Rotary Selector or push [▲] or [▼] to select a SIM card to use. LLThe SIM card name may be displayed, if it is entered. 6. Push [CLR/Lock] to exit "SIM Selection." LLPush [CLR/Lock] again to exit the Detailed Set mode and return to the Standby screen. TIP: You can also push [FUNC] to display the "SIM Selection" screen by enabling the "Show SIM selection" in the Detailed Set mode (p. 6-8). SET(Detail) SIM Selection Carrier A (SIM1) DDPocket Beep function The Pocket beep function sounds a notification tone and indication when a call is received. LLThis function is set by your dealer, or in the Set mode. LL" " is displayed when the function is ON. LL" " blinks and the notification beep sounds when a call is received. It blinks until the transceiver returns to the standby mode after a received signal disappears. DDP-Bell function The P-Bell function sounds the notification tone when a call is received. A received call is muted until you reply. After pushing [PTT], the mute is released. LLThis function is set by your dealer, or in the Set mode. LL" " is displayed when the function is ON. 3-8