Icom IP730D Instruction Manual - Page 37

6 SET MODE Set mode items (Continued) The shaded items are also displayed in the Basic Set mode. LLItems or default values may be differ, depending on the transceiverʼs version or presettings. Ask your dealer for details. DDCommon Item Side 1 Push Side 1 Hold Side 2 Push Side 2 Hold Backlight Brightness Contrast Bluetooth BT Auto Connect*5 BT Sync Vol.*5 BT Connect Type*5 BT PTT & Mic Switch*5 BT AF Output*5 BT Mic Gain*5 Description Option/range Sets the function to execute when you push [Side 1]. Null, Zone, Monitor, Talk Around, Message, One Touch, or Surveillance Sets the function to execute when you hold down [Side 1]. Null, Zone, Monitor, Talk Around, Message, One Touch, Surveillance, or AquaQuake Sets the function to execute when you push [Side 2]. Null, Zone, Monitor, Talk Around, Message, One Touch, or Surveillance Sets the function to execute when you hold down [Side 2]. Null, Zone, Monitor, Talk Around, Message, One Touch, Surveillance, or AquaQuake Selects a Backlight option. Auto, ON, or OFF Selects a Backlight brightness option. Light or Dark Sets the screen contrast. 1 ~ 16 Selects whether or not to enable the Bluetooth function. (p. 5-2) OFF or ON Selects whether or not to automatically OFF or ON connect a Bluetooth device. Selects whether or not to synchronize the OFF or ON Bluetooth headsetʼs volume level with the transceiverʼs volume level. LLWhen "ONˮ is selected, the Bluetooth headset volume can be set by rotating [VOL]. Selects the Synchronous ConnectionOriented (SCO) link*4 connection type of a Bluetooth headset. When "Auto Disconnect" is selected, the SCO link is automatically disconnected after 2 seconds. *4 A Bluetooth link for voice communication. LLThis setting is valid only when a Bluetooth device other than a VS-3 is used. LLWhen this item is set to "Auto Disconnect," the VOX function is not usable. Always Connect or Auto Disconnect Enables the user to select which microphone to use. LLWhen this item is set to "Auto," transmits the audio from the device whose [PTT] is pushed. Auto, Bluetooth Mic, or Radio Mic Selects the AF Output device when a Bluetooth headset is connected. BT Only or BT & SP Sets the Bluetooth microphone sensitivity. -12 dB ~ 12 dB (in 4 dB step) LLHigher values make the microphone more sensitive to your voice. Default Null Null Null Null Auto Light 8 OFF ON OFF Always Connect Auto BT Only 0 dB *4 In Dual mode, transmits in Sub mode regardless of the setting. *5 Displayed only when "ON" is selected in the "Bluetooth" item. 6-5