Icom IP730D Instruction Manual - Page 30
Using the Voice Recorder function, Deleting the recorded audio
View all Icom IP730D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
5 OTHER FUNCTIONS Using the Voice Recorder function The transceiver can record and playback up to 10 of the latestincoming calls, depending on a presetting� L Records up to 4 minutes per call� If a call is longer than 4 minutes, the older will be automatically deleted� L Therecordablecalltypemaydiffer,dependingonapresetting. L A recorded audio data cannot be exported� L This function does not record analog audio� D Using the Voice Recorder function 1. Enable the Voice Recorder function 1� Turn OFF the transceiver, if it is turned ON� 2� While holding down [FUNC], rotate [VOL] to turn ON the transceiver� • The Set Mode is displayed� L Releasefingerfrom[FUNC]when"SETMODE"isdisplayed. 3� RotateRotarySelectororpush[▲]or[▼]toselectanitemgroup"Common,"and then push [FUNC]� 4� Push [FUNC] or [Address] several times to select "Recording�" 5� RotateRotarySelectororpush[▲]or[▼]toselect"ON." 6� Push [CLR/Lock] to exit "Recording�" L Push [CLR/Lock] again to exit the Set mode and return to the Standby screen� 2. Turning ON the Voice Recorder function 1� Push [FUNC] to display the Function� • The Function screen is displayed� 2� Push [FUNC] to display "Recording," if another function is displayed� L You may need to push [FUNC] several times, depending on a presetting� 3� RotateRotarySelectororpush[▲]or[▼]toselect"ON." 4� Push [CLR/Lock] to return to the Standby screen� • " " is displayed� 3. Playing back the recorded audio " " blinks in the Standby Screen if there is recorded audio that has not been played back� 1� Push [Call History] to display the Function� • The Call History is displayed� 2� Push [Call History] several times to toggle the Call history from "Tx log," "Rx log," "TX MSG log," "RX MSG log," or "Recording Log�" L Displayedlogmaydiffer,dependingonapresetting. 3� Push[▲]or[▼]toselectaaudiotoplayback. Txlog→Rxlog→TxMSGlog→RxMSGlog→TxCalllog→RxCalllog→Recordinglog SET Recording ON 4� Hold down [Call History] for 1 second to playback the audio� L Push[▲]or[▼]tostopplayingbacktheaudio. D Deleting the recorded audio 1� Turn OFF the transceiver, if it is turned ON� 2� While holding down [FUNC], rotate [VOL] to turn ON the transceiver� • The Set Mode is displayed� L Releasefingerfrom[FUNC]when"SETMODE"isdisplayed. 3� RotateRotarySelectororpush[▲]or[▼]toselectanitemgroup"Common,"and then push [FUNC]� 4� Push [FUNC] or [Address] several times to select "Delete Recording�" 5� RotateRotarySelectororpush[▲]or[▼]toselect"Clear." 6� Push [Call History] to delete the recorded audio� 7� Push [CLR/Lock] to exit "Delete Recording�" L Push [CLR/Lock] again to exit the Set mode and return to the Standby screen� 5-9 SET Delete Recording Clear