Insignia NS-65D260A13 User Manual (English) - Page 37
Adding or changing a channel label, Checking the digital signal strength
View all Insignia NS-65D260A13 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Insignia 65" 1080p LED TV Adding or changing a channel label If a channel is not already labeled, you can label the channel to make it easier to identify. You can also relabel a channel that is already labeled. To add or change a channel label: 1 Press MENU. The on-screen menu opens. 4 Press S or T to select the channel you want to label, then press W or X to move to the channel label field. 2 Press W or X to highlight CHANNELS, then press T or ENTER. The Channels menu opens. 5 Press S or T to highlight a character, then press W or X to move to the previous or next character position. You can enter as many as 11 characters. 6 When you have completed the label, press MENU. 7 Press EXIT to close the menu. Checking the digital signal strength You can check the digital signal strength to determine if you need to adjust your antenna or digital cable input. The higher the signal strength, the less likely you are to experience picture degradation. To check the digital signal strength: 1 Press MENU. The on-screen menu opens. 3 Press S or T to highlight Channel Labels, then press ENTER. The Channels-Channel Labels screen opens with the channel number field highlighted. 2 Press W or X to highlight CHANNELS, then press T or ENTER. The Channels menu opens. www.insigniaproducts.com 33