Insignia NS-65D260A13 User Manual (English) - Page 56

Specifications - firmware

Page 56 highlights

NS-65D260A13 Insignia 65" 1080p LED TV Problem Solution After Auto Channel Search, there are no channels. • Reception can vary by channel depending on the broadcast power level of a given station. Contact your cable or satellite TV provider. • Make sure that the antenna or cable/satellite TV is connected securely to your TV. • Try replacing the cable between the antenna/cable or cable/satellite box and your TV. One or more channels do not display. • Make sure that the channels are not blocked. See "Setting parental control levels" on page 37. • Make sure that the channels are not hidden. The channel may have been deleted from the channel list. You can tune to the channel by pressing the number buttons or you can add the channel back to the channel list. See "Hiding channels" on page 31. • If you are using a cable or satellite box, use the remote that came with that box to change channels. • Make sure that you have the correct input selected to view channels from the cable or satellite box. • If you are using an antenna, the digital channel signal may be low. To check the digital channel signal strength, see "Checking the digital signal strength" on page 33. Password is lost. • Enter 9999 to access parental controls, then set a new password. See "Setting or changing the password" on page 34. Some settings cannot be accessed. • If a setting is grayed, the setting is not available in the current video input mode. TV cabinet creaks. • When the TV is in use, the temperature rises naturally and may cause the cabinet to expand or contract which can cause a creaking noise. This is not a malfunction. Control buttons do not work. • Make sure that the Button Lock option is set to Off. See "Locking control buttons" on page 35. • Unplug the power cord, wait a few seconds, then plug the cord back in and turn on your TV. TV keeps turning off. • Make sure that the sleep timer is not turned on. See "Setting the sleep timer" on page 42. Note: If the problem is not solved by using these troubleshooting instructions, turn off your TV, then turn it on again. Specifications Specifications are subject to change without notice. Dimensions and weight Without stand With stand 57.7 × 34.5 × 3.5 in. (146.6 × 87.8 × 8.9 cm) 56.2 lbs (25.5kg) 57.7 × 37 × 12.6 in. (146.6 × 94 × 32 cm) 67.2 lbs (30.5kg) Screen Screen size measured diagonally Display type Panel 60 Hz vs.120 Hz Display resolution Panel resolution Aspect ratio Contrast ratio (typical)-panel Dynamic contrast ratio- list value Brightness (center typical) cd/m2 Comb filter Response time Horizontal viewing angle Vertical viewing angle 64.5 in. LED 120Hz 1080p 1920 (H) × 1080 (V) 16:9 7000:1 165,000:1 350 nits 3d y/c digital 6.5 ms 178 178 Display resolutions and VGA scan rates HDMI suggested resolutions Component video suggested resolutions 1080p, 1080i, 720p, 480p, 480i 1080i, 720p, 480p, 480i Tuner Analog Digital NTSC ATSC, 8-VSB, Clear-QAM Inputs HDMI Component video Composite video Shared audio (component and composite) S-Video PC/VGA 3.5mm PC audio input DVI USB Antenna/Cable 1 (side)/2 (back) E-EDID compliant HDCP compliant 1 (back) 1 (back) Shared with component Y Yes No 1 (back) 1 (back) 1 (back) HDMI 1/DVI jack 1 (side) Supports JPEG and firmware upgrade 1 (side) 52 www.insigniaproducts.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61

52
NS-65D260A13 Insignia 65" 1080p LED TV
www.insigniaproducts.com
Note
: If the problem is not solved by using these troubleshooting
instructions, turn off your TV, then turn it on again.
Specifications
Specifications are subject to change without notice.
Dimensions and weight
Screen
Display resolutions and VGA scan rates
Tuner
Inputs
After Auto Channel
Search, there are no
channels.
Reception can vary by channel depending on the
broadcast power level of a given station. Contact
your cable or satellite TV provider.
Make sure that the antenna or cable/satellite TV
is connected securely to your TV.
Try replacing the cable between the
antenna/cable or cable/satellite box and your
TV.
One or more channels
do not display.
Make sure that the channels are not blocked. See
Setting parental control levels
” on page
37
.
Make sure that the channels are not hidden. The
channel may have been deleted from the
channel list. You can tune to the channel by
pressing the number buttons or you can add the
channel back to the channel list. See “
Hiding
channels
” on page
31
.
If you are using a cable or satellite box, use the
remote that came with that box to change
channels.
Make sure that you have the correct input
selected to view channels from the cable or
satellite box.
If you are using an antenna, the digital channel
signal may be low. To check the digital channel
signal strength, see “
Checking the digital signal
strength
” on page
33
.
Password is lost.
Enter
9999
to access parental controls, then set
a new password. See “
Setting or changing the
password
” on page
34
.
Some settings cannot
be accessed.
If a setting is grayed, the setting is not available
in the current video input mode.
TV cabinet creaks.
When the TV is in use, the temperature rises
naturally and may cause the cabinet to expand
or contract which can cause a creaking noise.
This is not a malfunction.
Control buttons do not
work.
Make sure that the
Button Lock
option is set to
Off
. See “
Locking control buttons
” on page
35
.
Unplug the power cord, wait a few seconds, then
plug the cord back in and turn on your TV.
TV keeps turning off.
Make sure that the sleep timer is not turned on.
See “
Setting the sleep timer
” on page
42
.
Problem
Solution
Without stand
57.7 × 34.5 × 3.5 in. (146.6 × 87.8 × 8.9 cm)
56.2 lbs (25.5kg)
With stand
57.7 × 37 × 12.6 in. (146.6 × 94 × 32 cm)
67.2 lbs (30.5kg)
Screen size measured
diagonally
64.5 in.
Display type
LED
Panel 60 Hz vs.120 Hz
120Hz
Display resolution
1080p
Panel resolution
1920 (H) × 1080 (V)
Aspect ratio
16:9
Contrast ratio (typical)–panel
7000:1
Dynamic contrast ratio–
list value
165,000:1
Brightness (center typical)
cd/m2
350 nits
Comb filter
3d y/c digital
Response time
6.5 ms
Horizontal viewing angle
178
Vertical viewing angle
178
HDMI suggested resolutions
1080p, 1080i, 720p, 480p, 480i
Component video suggested
resolutions
1080i, 720p, 480p, 480i
Analog
NTSC
Digital
ATSC, 8-VSB, Clear-QAM
HDMI
1 (side)/2 (back)
E-EDID compliant
HDCP compliant
Component video
1 (back)
Composite video
1 (back)
Shared with component Y
Shared audio (component
and composite)
Yes
S-Video
No
PC/VGA
1 (back)
3.5mm PC audio input
1 (back)
DVI
1 (back)
HDMI 1/DVI jack
USB
1 (side)
Supports JPEG and firmware upgrade
Antenna/Cable
1 (side)