Intel D102GGC2 Product Guide - Page 27
Installing and Removing a Processor - back plate
View all Intel D102GGC2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Installing and Replacing Desktop Board Components Installing and Removing a Processor Instructions on how to install a processor to the desktop board are given below. Installing a Processor CAUTION Before installing or removing a processor, make sure the AC power has been removed by unplugging the power cord from the computer; the standby power LED should not be lit (see Figure 3 on page 20). Failure to do so could damage the processor and the board. To install a processor, follow these instructions: 1. Observe the precautions in "Before You Begin" on page 23. 2. Open the socket lever by pushing the lever down and away from the socket (Figure 6, A and B). A B OM17210 Figure 6. Lift Socket Lever 3. Lift the load plate (Figure 7, C). Do not touch the socket contacts (Figure 7, D). C D D OM17211 Figure 7. Lift the Load Plate and Don't Touch the Socket Contacts 27