Intel D102GGC2 Product Guide - Page 32

Dimm 0, Dimm 1

Get Intel D102GGC2 PDF manuals and user guides View all Intel D102GGC2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

Intel Desktop Board D102GGC2 Product Guide 1. Observe the precautions in "Before You Begin" on page 23. 2. Turn off all peripheral devices connected to the computer. Turn off the computer and disconnect the AC power cord. 3. Remove the computer's cover and locate the DIMM sockets (see Figure 14). DIMM 0 DIMM 1 Figure 14. Installing a DIMM OM19144 4. Remove the PCI Express video card if it interferes with the DIMM retaining clips from being easily opened and closed. 5. Make sure the clips at either end of the DIMM socket(s) are pushed outward to the open position. 6. Holding the DIMM by the edges, remove it from its anti-static package. 7. Position the DIMM above the socket. Align the small notch at the bottom edge of the DIMM with the key in the socket (see Figure 14). 8. Insert the bottom edge of the DIMM into the socket. 9. When the DIMM is inserted, push down on the top edge of the DIMM until the retaining clips snap into place. Make sure the clips are firmly in place. 10. Reinstall the PCI Express card if it was removed prior to installing the DIMMs. 11. Replace the computer's cover and reconnect the AC power cord. 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
Intel Desktop Board D102GGC2 Product Guide
32
1.
Observe the precautions in "Before You Begin" on page 23.
2.
Turn off all peripheral devices connected to the computer.
Turn off the computer and
disconnect the AC power cord.
3.
Remove the computer’s cover and locate the DIMM sockets (see Figure 14).
OM19144
DIMM 0
DIMM 1
Figure 14.
Installing a DIMM
4.
Remove the PCI Express video card if it interferes with the DIMM retaining clips from being
easily opened and closed.
5.
Make sure the clips at either end of the DIMM socket(s) are pushed outward to the
open position.
6.
Holding the DIMM by the edges, remove it from its anti-static package.
7.
Position the DIMM above the socket.
Align the small notch at the bottom edge of the DIMM
with the key in the socket (see Figure 14).
8.
Insert the bottom edge of the DIMM into the socket.
9.
When the DIMM is inserted, push down on the top edge of the DIMM until the retaining clips
snap into place.
Make sure the clips are firmly in place.
10.
Reinstall the PCI Express card if it was removed prior to installing the DIMMs.
11.
Replace the computer’s cover and reconnect the AC power cord.