Intel D875PBZ Product Guide - Page 48

Setting the BIOS Configuration Jumper Block - bios update

Get Intel D875PBZ - Desktop Board Motherboard PDF manuals and user guides View all Intel D875PBZ manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

Intel Desktop Board D875PBZ Product Guide Setting the BIOS Configuration Jumper Block CAUTION Always turn off the power and unplug the power cord from the computer before changing the jumper. Moving the jumper with the power on may result in unreliable computer operation. The location of the desktop board's BIOS configuration jumper is shown in Figure 15. 13 J9J4 OM15676 Figure 15. Location of the BIOS Configuration Jumper Block The three-pin BIOS jumper block enables all board configurations to be done in BIOS Setup. Table 6 shows the jumper settings for the Setup program modes. Table 6. Jumper Settings for the BIOS Setup Program Modes (J9J4) Jumper Setting 13 13 Mode Normal (default) (1-2) Description The BIOS uses the current configuration and passwords for booting. Configure (2-3) After the Power-On Self-Test (POST) runs, the BIOS displays the Maintenance Menu. Use this menu to clear passwords. 13 Recovery (None) The BIOS recovers data from a recovery diskette in the event of a failed BIOS update. 48

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
Intel Desktop Board D875PBZ Product Guide
48
Setting the BIOS Configuration Jumper Block
CAUTION
Always turn off the power and unplug the power cord from the computer before changing the
jumper.
Moving the jumper with the power on may result in unreliable computer operation.
The location of the desktop board
’
s BIOS configuration jumper is shown in Figure 15.
OM15676
1
3
J9J4
Figure 15.
Location of the BIOS Configuration Jumper Block
The three-pin BIOS jumper block enables all board configurations to be done in BIOS Setup.
Table 6 shows the jumper settings for the Setup program modes.
Table 6.
Jumper Settings for the BIOS Setup Program Modes (J9J4)
Jumper Setting
Mode
Description
1
3
Normal (default) (1-2)
The BIOS uses the current configuration and passwords for
booting.
1
3
Configure (2-3)
After the Power-On Self-Test (POST) runs, the BIOS displays
the Maintenance Menu.
Use this menu to clear passwords.
1
3
Recovery (None)
The BIOS recovers data from a recovery diskette in the event of
a failed BIOS update.