Intel D875PBZ Product Guide - Page 66
SATA and PATA Submenus, Table 16., Primary/Secondary IDE Master/Slave Submenus
View all Intel D875PBZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Intel Desktop Board D875PBZ Product Guide SATA and PATA Submenus Main Advanced Security Power Boot Exit ` [SATA Port-0 : Xxxxxxxxx ] Type Maximum Capacity [Auto] [Auto] Configuration Options Selected By BIOS LBA Mode : Block Mode : PIO Mode : Ultra DMA : Cable Detected : [Supported] 16 Sectors Mode 4 Mode 6 Serial m o n p Enter F1 P9 F10 ESC Select Screen Select Item Select ` Sub-Menu General Help Setup Defaults Save and Exit Exit There are six IDE submenus: Two SATA and four PATA (primary master, primary slave, secondary master, and secondary slave). Table 16 shows the format of these IDE submenus. For brevity, only one example is shown. Table 16. Primary/Secondary IDE Master/Slave Submenus Feature Drive Installed Type Options None • Auto (default) • User Maximum Capacity None LBA Mode Control None (Note) Block Mode • Disabled • Auto (default) PIO Mode (Note) • Auto (default) • 0 • 1 • 2 • 3 • 4 Description Displays the type of drive installed. Specifies the IDE configuration mode for IDE devices. Auto fills-in capabilities from ATA/ATAPI device. User allows capabilities to be changed. Displays the capacity of the drive. Specifies LBA mode control. Check the hard disk drive's specifications for optimum setting. Specifies the PIO mode. continued 66