Intel D875PBZ Product Guide - Page 65

Using the BIOS Setup Program IDE Configuration Submenu Main Advanced Security Power Boot Exit IDE Configuration ATA/IDE Configuration SATA OOB Workaround PCI IDE Bus Master Hard Disk Pre-Delay SoftRAID Support [Enhanced] [Enabled] [Enabled] [Disabled] [Disabled] ` [SATA Port-0 : ` [SATA Port-1 : ` [PATA Primary Master : ` [PATA Primary Master : ` [PATA Secondary Master : ` [PATA Secondary Master : xxxxxxx] Not Detected] xxxxxxx] xxxxxxx] xxxxxxx] Xxxxxxx] m o n p Enter F1 P9 F10 ESC Select Screen Select Item Select ` Sub-Menu General Help Setup Defaults Save and Exit Exit This submenu shown in Table 15 is used to configure IDE device options. Table 15. IDE Configuration Submenu Feature Options ATA/IDE Configuration • Disabled • Legacy • Enhanced (default) Legacy IDE Channels PCI IDE Bus Master Hard Disk Pre-Delay SoftRAID Support • PATA Pri only • PATA Sec only • PATA PRI and Sec (default) • SATA P0/P1 only • SATA P0/P1, PATA Sec • SATA P0/P1, PATA Pri • Disabled • Enabled (default) • Disabled (default) • 3 Seconds • 6 Seconds • 9 Seconds • 12 Seconds • 15 Seconds • 21 Seconds • 30 Seconds • Disabled (default) • Enabled Description Specifies the integrated IDE controller. Disabled disables the integrated IDE controller. Legacy enables up to two IDE channels for OS requiring legacy IDE operation. Enhanced enables all SATA and PATA resources. Configures PATA and SATA resources for OS requiring legacy IDE operation. Allows a PCI device to initiate a transaction as a master. Specifies the hard disk drive pre-delay. Causes the BIOS to insert a delay before attempting to detect IDE drives in the system. Disables or enables SoftRAID support. 65