Intel DG965WH Product Guide - Page 38

Installing a DIMM, Memory must be installed in the Channel

Get Intel DG965WH PDF manuals and user guides View all Intel DG965WH manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Intel Desktop Board DG965WH Product Guide NOTE Memory must be installed in the Channel A, DIMM 0 socket to enable Intel® Quiet System Technology. To install a DIMM, follow these steps: 1. Observe the precautions in "Before You Begin" on page 27. 2. Turn off all peripheral devices connected to the computer. Turn off the computer and disconnect the AC power cord. 3. Remove the computer's cover and locate the DIMM sockets (see Figure 17). Figure 17. Installing a DIMM 4. Make sure the clips at either end of the DIMM socket(s) are pushed outward to the open position. 5. Holding the DIMM by the edges, remove it from its anti-static package. 6. Position the DIMM above the socket. Align the small notch at the bottom edge of the DIMM with the keys in the socket (see inset in Figure 17). 7. Insert the bottom edge of the DIMM into the socket. 8. When the DIMM is inserted, push down on the top edge of the DIMM until the retaining clips snap into place. Make sure the clips are firmly in place. 9. Replace the computer's cover and reconnect the AC power cord. 38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
Intel Desktop Board DG965WH Product Guide
38
NOTE
Memory must be installed in the Channel A, DIMM 0 socket to enable Intel
®
Quiet
System Technology.
To install a DIMM, follow these steps:
1.
Observe the precautions in "Before You Begin" on page 27.
2.
Turn off all peripheral devices connected to the computer.
Turn off the computer
and disconnect the AC power cord.
3.
Remove the computer’s cover and locate the DIMM sockets (see Figure 17).
Figure 17.
Installing a DIMM
4.
Make sure the clips at either end of the DIMM socket(s) are pushed outward to the
open position.
5.
Holding the DIMM by the edges, remove it from its anti-static package.
6.
Position the DIMM above the socket.
Align the small notch at the bottom edge of
the DIMM with the keys in the socket (see inset in Figure 17).
7.
Insert the bottom edge of the DIMM into the socket.
8.
When the DIMM is inserted, push down on the top edge of the DIMM until the
retaining clips snap into place.
Make sure the clips are firmly in place.
9.
Replace the computer’s cover and reconnect the AC power cord.