Invacare TRSX5 Owners Manual - Page 56

ANTI-TIPPERS/WHEEL LOCKS, Invacare, Tracer, SX5 Wheelchair, Part No. 1110550

Get Invacare TRSX5 PDF manuals and user guides View all Invacare TRSX5 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

10 ANTI-TIPPERS/WHEEL LOCKS Adjusting the Anti-Tippers  A 11/2 to 2 inch clearance between the bottom of the anti-tipper wheels and the ground/floor MUST be maintained at all times. 1. Place the wheelchair on a flat surface.  If adjusting anti-tippers on recliner models, ensure back canes are in the upright position before making adjustments. 2. Press the release buttons on the wheeled portion of the anti-tipper and slide it up or down to the desired adjustment hole. Release Buttons 3. Check to make sure that the release buttons are fully engaged in adjustment holes. 4. Ensure both anti-tippers are adjusted to the same height. 5. Measure the distance between the bottom of the anti-tipper wheels and the ground/floor. 11/2 to 2 inch Clearance FIGURE 2 Adjusting the Anti-Tippers 6. If the distance between the bottom of anti-tipper wheels and the ground/floor is not 11/2 to 2 inches, repeat steps 2-5 until the distance is 11/2 to 2 inches. 7. If the 11/2 to 2 inch distance cannot be achieved, a different model may be required. Contact an Invacare dealer or qualified technician. Invacare® Tracer® SX5 Wheelchair 56 Part No. 1110550

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
10
ANTI-TIPPERS/WHEEL LOCKS
Invacare
®
Tracer
®
SX5 Wheelchair
56
Part No. 1110550
Adjusting the Anti-Tippers
1.
Place the wheelchair on a flat surface.
2.
Press the release buttons on the wheeled portion of the anti-tipper
and slide it up or down to the desired adjustment hole.
3.
Check to make sure that the release buttons are fully engaged in
adjustment holes.
4.
Ensure both anti-tippers are adjusted to the same height.
5.
Measure the distance between the bottom of the anti-tipper wheels
and the ground/floor.
FIGURE 2
Adjusting the Anti-Tippers
6.
If the distance between the bottom of anti-tipper wheels and the ground/floor is not 1
1
/
2
to 2 inches, repeat steps 2-5 until the distance is 1
1
/
2
to 2 inches.
7.
If the 1
1
/
2
to 2 inch distance cannot be achieved, a different model may be required. Contact an Invacare dealer or qualified technician.
A 1
1
/
2
to 2 inch clearance between the bottom of the anti-tipper wheels and the ground/floor MUST be maintained at all
times.
If adjusting anti-tippers on recliner models, ensure
back canes are in the upright position before
making adjustments.
Release Buttons
1
1
/
2
to 2 inch Clearance