Invacare TRSX5 Owners Manual - Page 73

12 RECLINER 3. Reposition the wheel lock so that when engaged, the wheel lock shoe embeds the tire 1/8 inch (3/16 inch for pneumatic tires) and holds the occupied wheelchair in place when pushed. 4. Securely tighten the bolt and locknut or socket screws securing the wheel lock to the wheelchair frame. 5. Engage the wheel lock. 6. Measure the distance the wheel lock is embedded into the tire as shown in DETAIL "A".  Any wheel lock adjustment should embed the wheel lock shoe at least 1/8-inch (3/16-inch if pneumatic tire) into the tire when engaged. 7. Repeat STEPS 1-6 until the wheel lock shoe embeds the tire 1/8-inch (3/16-inch for pneumatic tires) and holds the occupied wheelchair in place when pushed. 8. Repeat STEPS 1-7 for the opposite wheel lock. 9. Engage both wheel locks and ensure the occupied wheelchair is held in place when pushed. ƽ WARNING If wheel locks DO NOT hold the occupied wheelchair in place contact a qualified technician. Wheel Lock Wheel Lock Handle DETAIL "A" - WHEEL LOCK SHOE ENGAGEMENT Bolt and Locknut Wheel Lock 1/8 inch (3/16 inch pneumatic tires) Wheel Lock Shoe Tire Rear Wheel FIGURE 8 Using/adjusting the Clamp-On Wheel Locks Adjusting the Clamp-On Wheel Locks Part No. 1110550 73 Invacare® Tracer® SX5 Wheelchair