Invacare TRSX5 Owners Manual - Page 71

12.6 Removing/Installing the Rear Wheels ƽ WARNING If changing the size of the rear wheel or a change in the Seat-to-Floor Height is desired, this procedure MUST be performed by a qualified technician. Ensure both rear wheels are the same size before using. Tracer SX5 recliner ONLY: Mount the rear wheels in the Rear Wheel Offset Bracket ONLY. NEVER reposition the rear wheels to the forward position, as stability of the wheelchair will decrease, and injury or damage may result. Removing 1. Note mounting position of existing rear wheel. 2. Remove the axle mounting screw and locknut that secure the existing rear wheel and spacer to the wheel offset bracket. 3. Remove the existing rear wheel from wheel offset bracket. Installing 1. Secure the new/existing rear wheel and spacer to wheel offset bracket with axle mounting screw and locknut. Torque locknut to 40 in-lbs. Rearward Mounting Position Rear Wheel Offset Bracket Locknut Rear Wheel Offset Bracket Spacer 12 RECLINER Forward Mounting Positions (DO NOT USE) Rear Wheel Axle Mounting Screw FIGURE 6 Removing/Installing the Rear Wheels Part No. 1110550 71 Invacare® Tracer® SX5 Wheelchair