JVC C11U Instruction Manual - Page 36
Multicast
UPC - 046838325670
View all JVC C11U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Preparations (Step 2 Setting the Network) 2-4 Other Settings with V.Networks Setup Tool [6. Multicast] Selecting [Multicast Mode] allows VN-C11 to send the same image data to multiple recipients on the network at one time without lowering the frame rate. • In a narrowband environment, for example, of dial-up connection, select [Unicast Mode]. • Multicast cannot be set for MPEG4. 1. Start up [V.Networks Setup Tool] and select [Multicast]. The [Multicast Setting] screen is displayed. Select [Multicast Mode]. Enter a multicast address to [Multicast address]. Multicast ● A multicast address can be set from 225.0.0.0 through 239.255.255.255. Do not set the same multicast address for different devices on the same system. ● To view VN-C11 images in the multicast mode through a router, an operating environment or a router setting is required as follows: 1 The router supports IGMP Ver. 2 and is synchronized with the starting and stopping of multicast transmission. And the route setting can be dynamically changed. 2 If the router does not support IGMP Ver. 2, a static route for multicast must be set to the router. 36