JVC C11U Instruction Manual - Page 42
Registering the Connected Camera with V.Networks Controller
UPC - 046838325670
View all JVC C11U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Preparations (Step 2 Setting the Network) 2-5 Registering the Connected Camera with V.Networks Controller The connected camera can be registered with the installed [V.Networks Controller]. 1. Select [Start], [Programs], [V.NETWORKS] and then up [V.Networks Controller]. [V.Networks Controller] to start Select [File] and [New]. 2. [New] is displayed. Enter 198.168.0.2 in [IP Address]. Note In a DHCP environment, enter the IP address allotted by the DHCP server. Enter [V.Network Name], a name under which the camera is registered. Use a name that is easy to remember, such as the installation location or number. (1 to 40 characters) Recording files of the name given in are saved in a designated folder here. You can set whether VN-C11 automatically starts recording upon connection. Note For connecting VN-C11 with the factory settings, either one of the environments described below is required. • Environment where no DHCP server exists. • Environment where a DHCP server, which clearly defines the IP address and MAC address allotted to VN-C11, exists. 42