JVC C11U Instruction Manual - Page 67
Effect, Available/ Not available, File Name, NTP Settings, Server IP Address, Timezone
UPC - 046838325670
View all JVC C11U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
6-4 Settings with a Web Browser (1. Other Settings) (continued) Item Default Page (continued) Available/ Not available File Name HTTP Port NTP Settings Available/ Not available Server IP Address Timezone Adjust Interval Effect Select [Available] to enable the Default Page function or [Not Available] to disable it. Enter the file name to be used as the default page. It is possible to enhance the security level by setting the HTTP server port number to other than the default value "80." (Value range: (1 through 65535 excluding 21 and 554) The new HTTP port number can be accessed with a Web browser. If the port number is changed to, for example, "12345," it can be accessed as http://192.168.0.2:12345 or http://192.168.0.2:12345/indexe.html. If the HTTP port number is unknown, refer to [V.Networks Setup Tool]. For settings of the NTP (Network Time Protocol) server. Select [Available] to enable the NTP server function or [Not Available] to disable it. Enter the NTP server IP address. Obtains the local time based on the Greenwich Mean Time. Rectifies time deviation by acquiring the correct time from the NTP server at a specified interval. Note • Password Protection Function VN-C11 is equipped with a security function for restricting browser (user) access. For this function, there are three access (security) levels according to the authorization status. The table below shows the accessible pages for each status. (For the VN-C11 Web page structure, refer to page 62.) Authorization Status User Operator Administrator Accessible VN-C11 Pages Still image and moving image pages Web pages except the setting pages All Web pages Caution ● Password setting cannot be released or changed unless the administrator password is entered correctly. Do not forget the administrator password. ● Password entry is not required if the user and operator passwords are set, but not the one for the administrator. The confirmation message, "Are you sure to RESET the camera to enable the changes?" appears. Pressing [OK] for this message prompts VN-C11 to activate its internal reset function, changing the IP address, etc. The previous, factory-set, IP address is no longer in effect, and connection to VN-C11 will be cut off. If there is no keystroke or mouse movement to the Web browser for a while, a message saying that connection cannot be established appears. This is due to the IP address change. (Changing the port number results in the same action.) 67