JVC C11U Instruction Manual - Page 70
Alarm Settings, Alarm Setting Window, Effect, Alarm In, Alarm 1 and 2, On/Off, Alarm Out
UPC - 046838325670
View all JVC C11U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Operations (Step 6 Operations with a Web Browser) 6-4 Settings with a Web Browser (4. Alarm Settings) Alarm Setting Window: http://******/alarm-e.html (****** represents the URL of VN-C11.) This section describes the setting of actions of VN-C11 when an alarm signal has been received. Click [Apply] to update the settings. Item Alarm In Alarm 1 and 2 On/Off Alarm Out Relay Alarm On/Off Relay Alarm Setting Alarm Out Alarm Out On/Off Momentum Value Power on Init Effect Specifies the action when an alarm signal has been received. Specifies the action when an alarm signal has been input to [Alarm 1] and/or [Alarm 2]. Select [On] if the alarm terminals [Alarm 1] and/or [Alarm 2] are to be used. If not to be used, select [Off]. If [On] is selected here, alarm signals are output to the [ALARM OUTPUT] terminal located on the rear panel. Sets the relay alarm function, which is activated when two alarms are successively received within a certain period of time. Select whether to enable or disable the relay alarm function. Sets the sequence and interval of alarm input. If [On] is selected here, alarm signals are output to the [ALARM OUTPUT] terminal located on the rear panel. Select [On] for alarm signals to be output to the [ALARM OUTPUT] terminal located on the rear panel. Sets the duration for sending alarm output signals. Sets whether to output high or low signals for alarm output. If [Yes] is selected, the alarm signal, which was set upon power connection, is output once. Caution • Perform the output setting appropriately according to the equipment to which signals are sent. • When the alarm setting is complete, check whether the alarm functions are working properly. 70