JVC FS-B70 Instruction Manual - Page 28
Using the Timers
View all JVC FS-B70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Using the Timers Three timers are available-Recording Timer, Daily Timer and Sleep Timer. • Before using these timers, make sure the built-in clock is set correctly (see page 9). Using the Daily Timer and the Recording Timer On the remote control ONLY: 1 Press CLOCK/TIMER. CLOCK/ TIMER The (timer) indicator lights up and the timer mode indicator (DAILY or REC) flashes on the display. The unit enters the on-time setting mode. You can set the timer when the unit is either turned on or in DAILY standby mode. How the timer actually works When the on-time comes, the unit automatically turns on (the (timer) indicator flashes just before the on-time and continues flashing while the timer is operating). Then, when the off-time comes, the unit automatically turns off (standby). The timer setting remains in memory until you change it. • When the DAILY indicator is lit on the display, the timer acts as the Daily Timer. Once the timer has been set, it will be activated at the same time everyday until the timer is turned off. • When the REC indicator is lit on the display, the timer acts as the Recording Timer. After the timed-recording finishes, the details of the setting remain stored but the timer is turned off. Ex.: When the Daily Timer has been selected the last time. 2 Set the on-time you want the unit to turn on. 1) Press UP or DOWN to set the hour, then press CLOCK/TIMER. 2) Press UP or DOWN to set the minute, then press CLOCK/TIMER. The unit enters the off-time setting mode. UP DOWN CLOCK/ TIMER DAILY Before you start... When using "TUNER" as the source to play, make sure to select the desired station before turning off the power. • There is a time limit in doing the following steps. If the setting is canceled before you finish, start again from step 1. 3 Set the off-time you want the unit to turn off. 1) Press UP or DOWN to set the hour, then press CLOCK/TIMER. 2) Press UP or DOWN to set the minute, then press CLOCK/TIMER. The unit enters the source setting mode. DAILY UP DOWN CLOCK/ TIMER 25