JVC FS-B70 Instruction Manual - Page 52
Tuning in to a Station, Presetting Stations, To change the FM reception mode
View all JVC FS-B70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
English Listening to FM and AM Broadcasts Tuning in to a Station 1 Press FM/AM to select either "FM" FM/AM or "AM." The unit automatically turns on and tunes in to the previously received station-either FM or AM. • Each time you press the button, the band alternates between FM and AM. 2 Press and hold ¢ or 4 (or ¢ UP or 4 DOWN on the unit) for more than 1 second. • ¢ (¢ UP): Increases the frequencies. • 4 (4 DOWN): Decreases the frequencies. Presetting Stations You can preset 30 FM and 15 AM stations manually. In some cases, test frequencies have been already stored for the tuner since the factory examined the tuner preset function before shipment. This is not a malfunction. You can preset the stations you want into memory by following the presetting method. • There is a time limit in doing the following steps. If the setting is canceled before you finish, start again from step 2. On the remote control ONLY: 1 Press FM/AM to select either "FM" FM/AM or "AM." The unit automatically turns on and tunes in to the previously received station-either FM or AM. • Each time you press the button, the band alternates between FM and AM. The unit starts searching for stations and stops when a station of sufficient signal strength is tuned in. • If an FM program is broadcast in stereo, the STEREO 2 Press SET. SET indicator lights up on the display (only when the "SET' starts flashing on the display. reception is good). To stop during searching, press ¢ or 4 (or ¢ UP or 4 DOWN on the unit). 3 Press UP or DOWN to select UP When you repeatedly press ¢ or 4 (or ¢ UP or 4 DOWN on the unit) a preset number. The frequency changes step by step. DOWN To change the FM reception mode On the remote control ONLY: When an FM stereo broadcast is hard to receive FM MODE or noisy, press FM MODE so that the MONO indicator lights up on the display. Reception will improve. To restore the stereo effect, press FM MODE again so that the MONO indicator goes off. In stereo mode, you can hear stereo sound when a stereo program is broadcast. You can also select the preset number by the number buttons. Ex.: For preset number 5, press 5. For preset number 15, press +10, then 5. For preset number 20, press +10, then 10. For preset number 30, press +10, +10, then 10. 1 2 3 4 5 6 7 8 9 10 +10 13