JVC FS-B70 Instruction Manual - Page 29
When selecting DAILY TIMER CD in step, Press STANDBY/ON
View all JVC FS-B70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Continued 4 Press UP or DOWN to select the timer mode (the Daily Timer or the Recording Timer) and the source to play, then press CLOCK/TIMER. • Each time you press UP or DOWN, the timer mode and the source to play change as follows: UP DOWN CLOCK/ TIMER DAILY TIMER CD REC TIMER TUNER DAILY TIMER TAPE DAILY TIMER TUNER • "DAILY TIMER CD": plays the selected disc or your program. (Daily Timer) • Load a disc or make the program. = go to step 5. • "DAILY TIMER TAPE": plays a tape. (Daily Timer) • Make sure that the tape is in the cassette deck. • Make sure that the tape direction is correct. = go to step 6. • "DAILY TIMER TUNER": tunes in to the last station you have been listening to. (Daily Timer) = go to step 6. • "REC TIMER TUNER": records the last station you have been listening to. (Recording Timer) • Put a recordable cassette into the deck. • Make sure that the tape direction and the Reverse Mode are correct. = go to step 6. 5 When selecting "DAILY TIMER CD" in step 4, select the disc number to play or Program Play. 1) Press UP or DOWN to select the UP disc number or Program Play. • Each time you press the button, the indication on the display changes as DOWN follows: CD DISC 1 CD DISC 2 CD DISC 3 CD PROGRAM CD DISC 5 CD DISC 4 • "CD DISC 1" - "CD DISC 5": plays the selected disc. • "CD PROGRAM": plays the program you have made. 2) Press CLOCK/TIMER. CLOCK/ TIMER The unit enters the volume level setting mode. 6 Press UP or DOWN to set the volume level, then press CLOCK/ TIMER. • You can select the volume level between "VOLUME - -" and "VOLUME 0" to "VOLUME 40." If you select "VOLUME - -," the volume level is set to the current volume. • To turn off the volume while the Recording Timer is working, set the volume level to "VOLUME 0." UP DOWN CLOCK/ TIMER The selected timer mode indicator (DAILY or REC) stops flashing. The unit enters the clock setting mode. 7 Adjust the clock if needed. • See "Setting the Clock" on page 9. 8 Press STANDBY/ON to turn off the unit if the unit is on. When the timer turns on the unit, the (timer) indicator and the selected timer mode indicator (DAILY or REC) start flashing. To deactivate the timer temporarily, press and CLOCK/ TIMER hold CLOCK/TIMER until the (timer) indicator and the selected timer mode indicator (DAILY or REC) go off. To activate and change the timer, repeat steps 1 to 7 on pages 25 and 26. • Deactivate the timer first in the following cases: - If you want to change the Daily Timer setting - If you want to change the Recording Timer setting before the Recording Timer works. • To activate the timer again without changing the setting, press CLOCK/TIMER repeatedly until the (timer) indicator and the selected timer mode indicator (DAILY or REC) light up on the display. If the unit is already turned on when the timer-on time comes The timer does not works. When you unplug the AC power cord or if a power failure occurs The timer will be canceled. You need to set the clock first, then set the timer again. When you have selected "CD PROGRAM" in step 5 Do not press DISPLAY while the unit is in standby mode to turn off the clock indication ("DISPLAY OFF"); otherwise, the program contents is cleared and playback starts in the Continuous Play mode when the timer-on time comes. 26